WHEELDOCTOR

MSS Workshop Ltd, City Mills, Peel Street, Morley, Leeds, LS27 8QL
INFO@MSSLTD.ORG.UK
Opening Times: Mon-Fri 8:00am to 5:00pm   TEL: 0113 252 4868

PROFILING, STRAIGHTENING/REPAIR, WELDING, FILLING AND PAINT PREPARATION - ALLOY WHEEL REPAIR LEEDS


sand blasting Leeds image The edge/lip of the wheel is profiled using grinder and sander to remove kerb damage and provide a clean defined rim before painting. Face of wheel may require sanding either manually or with orbital sander to provide sufficient clean surface. Traces of residual paint may still need to be removed, if so this is only done on face of wheel, i.e. residual paint may still be visible on back or well. Any other major imperfections are tried to be removed or smoothed out, and the face of wheel, depending on style, will be sanded to provide as smooth a surface as possible.

Large chunks or dents can be filled using a special putty mixture, which is baked and then shaped accordingly. The end result is never perfect but can be visually more acceptable than before. This is an extra cost and process. After Filling the wheel can be painted as before.

Wheels that have slight misshaping, are bent, cracked or buckled may be able to be straightened/repaired/welded by our alloy wheel repair Leeds service, it is never perfect but can be good enough to make the wheel serviceable and usable. This is assessed on a per wheel basis, and the end result is never guaranteed. We use a specially developed hydraulic ram press along with high heat to try and reshape wheels; there will be a mark and change in colour where the reshaping took place, if on back of wheel which cannot be seen this can be done without any stripping, blasting or re-painting. But if on front then the job is a lot more intense. Again all this is an extra cost to the basic service.

Notes;

The visual finish of any alloy wheel repair Leeds is never guaranteed, we try our best with all wheels throughout the processes, but some just cannot be made to look any better. With straightening, profiling and filling the wheels usually have damage we are trying to cover up or repair, so in general the wheel will never be as new again. No guarantee under any circumstances is given to the profiling, straightening or filling process/finishes.
Sand Blasting & Powder Coating WORKSHOP

Sand / Grit Blasting  |   Bead Blasting  |   Product Removal & Degreasing  |   Powder Coating  |   Wet Coating
Custom Colour Special Effects CUSTOM COLOUR & SPECIAL EFFECT

Candy, Pearls & Fluoros |  2-Tone, Fade-Out & Flakes |  Rag-Rolls & Marbelising
Concrete & Stone Coating CONCRETE, STONE & GRANITE COATINGS

Step Edge Demarcation  |   Concrete & Stone Coating  |   Concrete & Stone Cutting  |   Picture Paving
MSS Group THE MSS GROUP

MSS Workshop  |   MSS Wheeldoctor  |   MSS Magic Coatings  |   MSS Concrete  |   MSS Unique
© MSS LTD 2017